Briefly describe how to correctly install and secure conveyors
In modern industrial production, conveyors are increasingly used. It can not only save costs by replacing personnel, but also increase work efficiency. Conveyors come in a variety of sizes. There are flexible chain conveyors, mesh belt conveyors, belt conveyors, chain plate conveyors and so on. Shanghai Yuyin summarizes the relevant installation points of belt conveyors.
1. Put a flexible shaft on the belt take-up iron core of the belt conveyor, and put the belt roll on the shelf. Before putting it on the shelf, be careful not to reverse the direction of the upper and lower cover glue.
2. In workplaces that are not suitable for racking, the belt conveyor belt roll can be guided away, and the folded conveyor belt should have a large enough curvature radius to prevent damage to the conveyor belt. It is prohibited to place heavy objects on the conveyor belt at the folded position.
3. If the belt conveyor is to be replaced, the new belt can be connected to the old belt, and the belt removal and installation of the new conveyor belt can be carried out at the same time.
4. For belt conveyors running horizontally, the old belt conveyor can be cut off at any point. For belt conveyors running in an inclined direction, the cutting point needs to be selected to prevent the belt conveyor from falling out of control due to its own weight.
5. After positioning the new belt on the belt conveyor, fix one end of the belt with a clamp, then connect the rope around the roller to the pulley, and balance the conveyor belt to the belt conveyor through the traction device. When moving, be sure to prevent the conveyor belt and the frame from squeezing each other.
6. Use a clamp to fix one end of the conveyor belt on the belt conveyor frame, and tighten the other end through a pulley until the conveyor belt does not sag significantly on the return roller.
7. Fix the tensioning device on the belt conveyor 100~150mm away from the starting point.
-
10-06
What are the trends in the food packaging industry
In recent years,with the rapid development of the food industry,as well as the continuous upgrading of the consumer market,the food packaging industry has ushered in a new development trend,for example,new packaging materials can realize green degradation,reduce“white pollution”;intelligent pa
-
09-28
The problem of abnormal noise affecting belt conveyors
When a belt conveyor is in operation, its transmission device, transmission roller, reversing roller and idler pulley set will emit abnormal noise when it is abnormal. According to the abnormal noise, you can judge the failure of the equipment.(1) The noise of belt conveyor when the roller is seriou
-
09-15
Xianbang Intelligent Machinery Co., Ltd. celebrates Mid-Autumn Festival and sends warm wishes to global customers and employees
As the Mid-Autumn Festival is approaching, Zhongshan Xianbang Intelligent Machinery Co., Ltd, as a leading manufacturer of conveying equipment, not only provides high-quality conveying solutions for customers around the world, but also never forgets to give back to the society and care for the spiri
-
09-09
Food Conveyor Leads New Trend of Food Conveying
In the food processing industry, efficient and safe conveying equipment is crucial. As a leader in the industry, SHENBANG Intelligent Machinery Manufacturer has always been committed to providing customers with the best quality food conveyor solutions.On 6 September 2024, we are pleased to announce